Just recently in either MBR of WMB magazine there was a workshop article showing how to reduce the travel of a F series or Float series fork by fitting fox spacers.
Has anybody got this article or does anybody know of a walk through link on'tinternet?
Allan
Fox fork spacer travel adjustment??????????
Moderators: StephF, Tullio, Moderators
http://service.foxracingshox.com/consumers/index.htm
There's a menu option for instructions on 32mm Travel Adjust. It's actually a lot easier to do than they describe....so long as you kept all the spacers that came with the forks.
Why you selling the Blur?
There's a menu option for instructions on 32mm Travel Adjust. It's actually a lot easier to do than they describe....so long as you kept all the spacers that came with the forks.
Why you selling the Blur?
You'll need;
26mm socket
10mm socket
Spacers (you should have 2 in the box with the forks)
Torque wrench
Fox Fluid
Suspension Oil (whichever weight you're using)
Syringe is handy too or a small measuring pot to measure the new fluid.
The instructions will tell you to install new crush washers but you can get away with re-suing the old ones.
26mm socket
10mm socket
Spacers (you should have 2 in the box with the forks)
Torque wrench
Fox Fluid
Suspension Oil (whichever weight you're using)
Syringe is handy too or a small measuring pot to measure the new fluid.
The instructions will tell you to install new crush washers but you can get away with re-suing the old ones.