by Cyan Skymoos
Thu Nov 08, 2012 3:43 pm
I'm going to sell my very nice Trek, if anyone is interested in getting a top end machine for half the cost of a new one.
Most of you have seen it, it's black/yellow/white with Sram Red(yellow) groupset apart from the chainset/cassette which is Dura Ace. The finishing kit is all top end and the wheels are DT Swiss RRC46. The wheels alone cost maybe £1700 a pair.
I bought the frame from those nice guys at cycleworks last summer(2011) and done a season and half on it. It's got the odd scuff, stone chip and scratch here and there and the cranks are a bit heel scuffed. But that's about it, loads of life left in the drive chain and all bearings are top quality and recently changed.
I doubt I've ever put more than 300 watts through the crank and it's never slid down the road. You'd be getting the real deal here.
Size 56 I'm 5 10" and fits me like a glove would probably be ok for someone an inch either side of that. It's the H1 geometry with plenty of uncut steerer.
In no rush to sell, just putting it out there, and would be prepared to break up if someone just want frame/wheels etc.
07728035040, or I can email pics if you're interested, inspection/ test ride welcome.
Most of you have seen it, it's black/yellow/white with Sram Red(yellow) groupset apart from the chainset/cassette which is Dura Ace. The finishing kit is all top end and the wheels are DT Swiss RRC46. The wheels alone cost maybe £1700 a pair.
I bought the frame from those nice guys at cycleworks last summer(2011) and done a season and half on it. It's got the odd scuff, stone chip and scratch here and there and the cranks are a bit heel scuffed. But that's about it, loads of life left in the drive chain and all bearings are top quality and recently changed.
I doubt I've ever put more than 300 watts through the crank and it's never slid down the road. You'd be getting the real deal here.
Size 56 I'm 5 10" and fits me like a glove would probably be ok for someone an inch either side of that. It's the H1 geometry with plenty of uncut steerer.
In no rush to sell, just putting it out there, and would be prepared to break up if someone just want frame/wheels etc.
07728035040, or I can email pics if you're interested, inspection/ test ride welcome.